How to Properly Jump Start a Car Complete Step by Step details

How to Jumpstart a Car

Step-by-Step Guide[edit]

1. Clamp one cable to the positive (+) terminal of the dead battery. Don't let the positive cable touch anything metal other than the battery terminals.
2. Connect the other end of the positive cable to the positive terminal of the good battery.
3. Connect one end of the negative (-) cable to the negative terminal of the good battery.
4. Connect the other end of the negative cable to metal on the engine block on the car with the dead battery. Don't connect it to the dead battery, carburetor, fuel lines or moving parts.
5. Stand back and start the car with the good battery.
6. Start the stalled car.
7. Remove the cables in reverse order.

To safely jump a start, follow these steps:
Take out your jumper cables.
It's a good idea to buy a set of jumper cables and keep them in the trunk compartment. If you don't have jumper cables, you have to find a good Samaritan who not only is willing to assist you but who has jumper cables as well.
Place both vehicles in Park or Neutral and shut off the ignition in both cars.
Engage both parking brakes as well.
Attach one of the red clips to the positive terminal of your battery.
It has "POS" or "+" on it, or it's bigger than the negative terminal.
Attach the other red clip to the positive terminal of the other car.
Attach one of the black clips to the negative terminal on the other battery.
Attach the last black clip to an unpainted metal surface on your car that isn't near the battery.
Use one of the metal struts that holds the hood open.
The cables should look like this.
Make sure to connect jumper cables in the proper order.
Start the working vehicle and let the engine run for a few minutes.
Try to start your vehicle.
If it won't start, make sure that the cables are properly connected and have the good Samaritan run his or her engine for five minutes. Then try to start your car again. If it still won't start, your battery may be beyond help.

• fuses
• battery corrosion
• faulty alternator
• ignition switch
• starter connection

How to #Properly #JumpStart a #Car Complete Step by Step details https://youtu.be/I-CKkALRkoY?list=PLBrgsoi5rITc4Gm0JUaiLsZfenyobYJzd via @YouTube